Polyimide FEP(F46) film (similar to Kapton FN) is made of coating Polyimide film with FEP resin(F46) on one side(FH) or double sides(FHF) and through the sintering process at high temperature, which combines the excellent properties of Polyimide film and FEP resin of high& low temp resistant, radiation resistant, corrosion resistant, excellent electrical properties, superior dimensional stability and heat sealable properties. It performs successfully in the wide range of temperature as low as -112F(-80c) and as high as +500F(+260c). Polyimide FEP(F46) film (similar to Kapton FN) is widely used for insulation in motor, electrical apparatus and wrapping of cable and magnet wire, heater manufacture etc.
Total Thickness: | 0.038mm |
Tolerance: | +/-10% |
Base Film: | 0.026mm polyimide film |
Coating: | FEP 0.012mm *1(single side) |
Structure: | 019, similar to Kapton FN |
Min. Slitting Width: | 10mm |
Main Application: | cable widing, magnet wire winding |
*The minimal order is 5kg.
*Slitting service only been offered for the order of log rolls arround 28kg/roll, and it is free charged.
Please do fill the siliting width in the following blank.The minimal slitting width is 10mm, you can increase by per 0.5mm.
*Very Important:We do not offer the width slitting service for the order less than 28KG, the width slitting service will be neglected within this weight. The default width will be from 500mm to 650mm based on our material stock. If you have special request, please leave us message or send us by email at "Contact Page".
Price based: USD/kg